Detailed Product Description

Day/Night Pan/Tilt IP Camera,network camera,ip dome camera,internet camera,web camera

* Day/Night  1/3" CMOS sensor   built-in server
* Resolution: VGA(640x480) ,CIF(352x288)
* Lens: 6mm.8mm.10mm.16mm ,F=2.0/4 Glass, 1 Filter/Fl=6.0mm
* Angle: 60degree
* 12 infrared led, Effective distance: 10 meters
* Pan, +/-150∑(0° ~ 360°)
* Tilt: +/-30∑(0° ~ 180°)
* Pan / Tilt speed, 60°/sec
* Signal system: PAL / NTSC
* S/N ratio: 48dB (AGC off)
* Minimum illumination: 5.0 Lux @ F2.0
* Interface RJ45 & DC Power
* Compression format: MJPEG
* Operating temperature: -20°C ~ + 50°C
* Power supply: DC 5.3V/1A, 100~240V
* Dimension: 130(W) X 130(H) X 150(D)
*Weight:800g

* Accessories: one power, one disk, the disk includes software and manual 

Features:
1) No need to install software to locate unit within your LAN. The LCD will
display your current IP
2) View images from your web enabled PDA / mobile phones
3) Bundled utility to locate unit installed in inaccessible location
4) Monitor multiple iCAMView using iMultiView (Windows based freeware)
5) Flexible motion detection and image recording functions
6) Email notification for motion detection and daily report
7) Configured with up to 4 viewing time frames (permit hours)
8) Able to display multiple images on a single screen
9) Supports up to 30 simultaneous remote viewers per USB camera
10) Displays viewer's IP, account, viewed camera, login time and total
downloaded bytes
11) Detailed event log with listing options
12) Event listing by level and type
13) Limit the max. fps
14) Viewer number control per USB camera (max. of 30 viewers/camera)
15) Block / black-list up to 256 IP addresses from accessing iCAMView
16) Schedules up to four time slots when motion detection is active
17) Upload motion detected images to a specified FTP server
18) Schedules up to two time slots for image forwarding (to Email or FTP
server)
19) Update firmware directly from iCAMView webpage
20) Saves current settings to a file